| On-Site | Accredited* | |
|---|---|---|
| Angle | ||
| Angle block | ||
| Chamfer gauge | ||
| Inclinometer | ||
| Level | ||
| Protractor | ||
| Sine bar | ||
| Square | ||
| Transit / laser level | ||
| CMM | ||
| Coordinate Measuring Machine | ||
| Diameter | ||
| Bore gauge | ||
| Cylindrical plug gauge | ||
| Master disc | ||
| Pi tape | ||
| Pin gauge | ||
| Plain taper plug | ||
| Radius gauge | ||
| Section Surfaces | ||
| Coating thickness gauge | ||
| Parallels | ||
| Roughness tester | ||
| Surface plate | ||
| V block | ||
| Distance | ||
| 1 2 3 Blocks | ||
| Cable length | ||
| Caliper | ||
| Counter sink gauge | ||
| Crimpers | ||
| Depth gauge | ||
| Feeler gauge | ||
| Flushness gauge | ||
| Footage counter | ||
| Gauge block | ||
| Glass scale | ||
| Height gauge | ||
| Height set masters | ||
| Indicator | ||
| Metal detector | ||
| Micrometers | ||
| Microscopes | ||
| Mikemaster | ||
| Optical comparator | ||
| Profile projector | ||
| Ruler | ||
| Snap gauge | ||
| Step block | ||
| String potentiometer | ||
| Supermicrometer | ||
| Tape measure | ||
| Thickness gauge | ||
| Torque arm | ||
| Threads | ||
| Plug gauge | ||
| Profile gauge | ||
| Ring gauge | ||
| Thread & gear wires | ||
Dimensional Calibration Services
Precision dimensional calibration on your terms. Stay compliant and audit-ready without the hassle.
Dimensional Calibration Service Overview
Aldinger technicians can calibrate your equipment for accuracy to one millionth (1/1000000) of an inch on certain equipment.
* Aldinger is accredited by A2LA to ISO/IEC 17025 standards
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Calipers | |||
Up to 24 in (24 to 48) in |
550 μin 1100 μin |
Gauge blocks (field) |
|
Up to 48 in (48 to 96) in |
61 μin 1500 μin |
Gauge blocks (field) Gauge blocks (lab) |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Dial & test indicators | |||
Up to 1 in Up to 3in |
20 μin 99 μin |
Gauge blocks (lab), Gauge blocks, ULM, SuperMic (lab) |
|
Up to 3 in |
90 μin |
Gauge blocks (field) |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Gauge blocks | |||
Up to 1 in 2-4 in |
(3.3 + 1.5L) μin (7.7 + 1.5L) μin |
Master gage block set, Federal 130B-24 comparator |
|
(4 to 20) in |
(7 + 2L) μin |
Master gauge block set, ULM |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Angle blocks | |||
(0 to 90)° |
0.005° |
Sine bar & gauge blocks |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Squares | |||
Up to 18 in |
99 μin |
Master square, amplified gauge head |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Height gauges | |||
Up to 48 in |
280 μin 89 μin |
Gauge blocks (field) Gauge blocks (lab) |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Length standards | |||
Up to 18 in Up to 48 in |
(37 + 1.5L) μin (65 + 1.5L) μin |
ULM / SuperMic10, gauge blocks |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Levels | |||
Up to 12 in |
(40 + 14L) μin |
Surface plate, granite square |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Micrometers | |||
Up to 4 in (4 to 24) in (24 to 48) in |
33 μin 550 μin 1100 μin |
Gauge blocks (field) |
|
Up to 4 in (4 to 24) in (24 to 96) in |
15 μin 60 μin 1500 μin |
Gauge blocks (lab) |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Plain ring gauges | |||
(0.125 to 12) in |
(22 + 1.5L) μin |
ULM, gauge blocks |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Protractors | |||
(0 to 90)° |
0.049° |
Surface plate, angle blocks, sine bar w/gauge blocks |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Thread plugs | |||
| Pitch Diameter | (0.040 to 4) in (4 to 12) in |
(71 + 1.5L) μin (94 + 1.5L) μin |
Three-wire method, direct measure |
| Major diameter | (0.040 to 4) in (4 to 12) in |
(19 + 1.5L) μin (35 + 1.5L) μin |
Three-wire method, direct measure |
| Pitch diameter (taper) | (0.040 to 4) in (4 to 12) in |
(77 + 1.5L) μin |
Three-wire method, direct measure |
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Adjustable thread rings | |||
Up to 3.125 in |
(W) Master plug tolerance |
Set using master plug gages. ASME/ANSI B1.2-1983 and ASME/ANSI B1.3-2007 |
|
| Taper thread rings – pitch diameter | Up to 3 in |
120 μin |
Two-wire method, direct measure |
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Thread wires | |||
(4 to 80) TPI |
(11 + 1.5L) μin |
Master thread wire set |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Surface plates- flatness and repeatability | |||
Up to 107 in DL |
(48 + 0.41DL) μin |
Leveling system (DL is diagonal of the plate) |
|
| Indicator stands | (-0.002 to 0.002) in |
31 μin |
Repeat reading gauge |
(-0.002 to 0.002) in |
45 μin |
Repeat reading gauge, triangular gauge block base |
|
(-0.01 to 0.01) in |
580 μin |
Indicator, triangular gauge block base |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Optical comparators | |||
| X-axis | Up to 12 in |
(250 + 91L) μin |
Glass scale |
| Y-axis | (0.040 to 4) in |
(250 + 91L) μin |
Glass scale |
| Angle | (0 to 90)° |
0.029° |
Angle blocks |
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Rulers | |||
Up to 72 in |
0.013 in |
Standard ruler |
|
| Tape measures | Up to 40 in Up to 100 ft |
0.013 in 0.062 in |
Standard ruler Standard tape |
| Pi tapes | Up to 72 in |
910 μin |
Gauge blocks |
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Radius gauges | |||
Up to 0.75 in |
1300 μin |
Optical comparator and overlay |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Angle gauges | |||
Up to 180° |
0.044° |
Optical comparator and vernier |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Torque arms | |||
Up to 24 in |
0.0047 in |
Height gauge, test indicator |
|
Up to 48 in |
0.003 in |
Gauge blocks |
|
| Range | CMC (±) | Comments | |
|---|---|---|---|
| Coating / Electromagnetic thickness | |||
Up to 120 mils |
0.25 mils |
Shims |
|
Don't see exactly what you're looking for?
Our calibration specialists are here to help. We’ll assess your measurement equipment—even unique or highly specialized tools—to determine the best calibration solution for you.